NEXT STEP...
Ready to sand... to show up all the imperfections an old painters trick is to shine a light on a low angle on the surface you need to sand and presto.....imperfections galore. Id rather sand out all the imperfections at this early stage and reprime than to find something later on down the road where its a lot harder to erase.
With this trick i found some dodgy cutting marks around both sides of the body. So time to Sand to bare and reprime.
I used a sponge sanding block at this early stage cos it contours to the body easily without damaging the edges too much. Its 80 and 120 grit each side.
Reply With Quote