Soooo the one advantage of a bung neck, stain test piece.
Also as this needs to be finished before christmas has started the backup plan as a possible substitue.
Soooo the one advantage of a bung neck, stain test piece.
Also as this needs to be finished before christmas has started the backup plan as a possible substitue.
Tony
So got the new neck to fix this guitar and is a super tight fit with plenty of meat to adjust to suit.
Should probably start a new thread but have continued with the PRS substitute and halfway through clearing the body and neck. Going silver hardware and zebra rocksongs. Waiting on some silver pickup rings. This has a mahogony body and a Basswood neck and had DB do a bone nut. Have to fix a small chip on the treble side of the headstock so bit of a sandbck reshape and should be sweet.
Tony
Super nice job on that blue Tony, ... really hot! (which is certainly saying something as I'm not usually a big fan of blue as a guitar colour)
Wait a minute ... that sounds like Rock and/or Roll!
SG-1 ... "Little Miss" finished in Flamenco Cherry Wudtone
TL-1A ... "Slugger" finished in Antique White Nitro
EX-1 ... "Metal God" finished in nickel-plate (work in progress)
ST-1A ... "Scrapper" stained and finished in linseed oil ... and with the "secret weapon"
GR-1SF ... "Rocker-billy" (just arrived, work in progress)
This is looking very nice, well done
Current Projects
#Planning 5 String Bass
It's looking really good Tony.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
that PRS looks sensational Tony, is that the one with no bridge holes drilled ? Haven't seen a PRS with trapezoid fret markers on the fingerboard and a 24 fretter
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
thanks Guys
Wokka this was one of the custom kits that was dropped. Yeah has some cool variations to the standard.
The basswood neck was a bit of a weird choice but will see how it goes.
Tony
nice one Tony, so did you drill the string through holes and fit the ferules ?
You are king of the popped flames !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Wokka string holes were already there.
Havent put ferrules in yet and wondering wether I have done the right thing, as was going to fit once the finish is done.
And no kinglyness, only the fickle favour of the Kit Gods in the quality of tops and grains in the last 4 or 5 kits.
Tony
The burst on that body is sensational.
Big ups to Adam.
Reply With Quote
