Coming along well Joe. With the fret dot markers get some similar color saw dust to the fingerboard, mix with CA glue and fill in the gaps. Let it dry and sand off. Try going over the burst edge with black again. Looking at the earlier burst pic you need a darker black stain. It looks grey
Last edited by wokkaboy; 08-06-2016 at 07:12 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Ty for the tip wokkOriginally Posted by wokkaboy
8 (extremely thin) coats of tru oil and the back is starting to shine.
First coat of TO on the headstock.
Sexy Magical things happening with the fretboard.
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Roller nut BAM
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Nice roller nut Joe. You may need to adjust the height once the strings go on
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I know
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Looking good Joe. what tool do you use to cut those inlays?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
And then just drilled the existing inlays with a 6mm hand drill and the side inlays with 3mm.
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
nice looking cutter set Joe, good work
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Final curing of the front and sides of the body and back of neck.
Placed a large order for quality parts
Fender tex mex pickups
St wiring kit, should be good enough right?
https://m.thomann.de/gb/montreux_139...rch=1465637827
Wilkinson steel block vintage (6 point)
Bridge with 2 extra springs to go 5 spring
Wilkinson staggered locking tuners vintage look
Fender rolling string trees
Power slinkies (11 - 48) for e flat.
Pearloid white pickguard
Off white accesory kit
And a line 6 pod studio ux2 with an fbv shortboard mk2 to upgrade from my little pod gx
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Still waiting for another delivery for the rest of the parts, maybe tomorrow or thursday but graspop is this weelznd so won't have time till next week.
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Posting Permissions
Reply With Quote
