Non PBG GOTY Entrants

Seeing as there are a few non PBG kits showing up that were mostly bought from the DIY Guitars closing down sale thought it might be good to showcase them under a separate thread with a common theme.

Not intending to detract from GOTM as that is the pinnacle and something we should all aspire to enter and ultimately win.

Welcome to Non PGB Guitar of the Year (GOTY).

Enter your finished guitar here to be judged for Non PBG GOTY.

Please remember similar rules as per PBG GOTM:

We would like to see at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)
. link to your build diary
. link to any video or sound clips of completed guitar


Please post your photos in this thread.

Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible.

Competition for 2016 closes 31 December 2016.

Winner will be judged by the highest number of forum member 'likes' for each guitar.

Prizes....bragging rights only plus the bonus of having a highly desirable guitar that is the envy of many fellow guitar builders.

Hmmm.... 31st December. The intensifying coat ​should be dry by then...

Maybe June or July for me, getting gun shy of doing any finishing with things cooling down rapidly here.

Man I didn't know about that closing down sale fast enough. I would have snagged a Thinline Tele kit.

Does this have to be from a kit or is from scratch still eligible?

Quote:

---

Originally Posted by B'Lark

Man I didn't know about that closing down sale fast enough. I would have snagged a Thinline Tele kit.

Does this have to be from a kit or is from scratch still eligible?

---

Mate any Non PBG entry is cool with me and reckon same goes for everyone else as no other place on this forum to really show off your finished builds.

Awesome! I shall be jumping in on this for sure then!!

I guess I'll just put this here.
This is a kit from the DIY Guitars sale it looks the same the TL-1TB.
I was going to do a build diary but I am useless at remembering to take photos of things as I do them plus I probably would have gotten booted from the forum because a lot of swearing went into this kit. The front of the guitar was meant to be black colortone and tru-oil finish like the back but I had a mishap (lot of swearing and firewood threats) so sanded back and out came the rattle cans. Got a tele pick guard with room for a humbucker and modified it to fit around the F hole and the humbucker ring. I put a humbucker sized P90 in the neck, I put an Entwistle HV58 in the bridge and wired it up with a push/pull pot for coil splitting, has an orange drop tone cap, and one of DB's bone nuts. When I assembled it all the swearing was forgiven as it played nicely and sounded great with very little setting up. Then after playing for a while I realized even after leaving the body sit for a few weeks after applying the clear coat to the front it must have been slighty tacky still hence the wearing on the back edge of the guitar(more swearing). As I said all was forgiven because it plays great and sounds fantastic might look into doing a better job of the finish on the front later on.
Attachment 11863
Attachment 11864
Attachment 11865
Attachment 11866
Attachment 11867

That is a very slick Tele, Fuzz, feel proud mate

Have to agree with Stan as that looks great.

Hey Fuzzy that looks like a super cool Tele well done

It looks like all your swearing and persistence paid off, very nice tele

Sent from my GT-I9506 using Tapatalk

Thanks guys! Now I can get stuck into my ES-1G again.

I would like to introduce you all to my Non PBG Ash J Bass.

All stock parts except for 3 x 250k Bourns audio taper pots, Sprague 0.047 Orange Drop Capacitor, Switchcraft output socket. Finished in a blend of 4 parts ColorTone Cherry Red to 1 part Blackstone Uluru Red Fountain Pen Ink, stained twice, then finished off with 20 odd coats of Tru Oil on the body and around 12 or so coats on the neck.

Attachment 12163Attachment 12164Attachment 12165Attachment 12166Attachment 12167

http://www.buildyourownguitar.com.au...ead.php?t=4813

Forgot to put the Diablo Diddly box in here! Neck is from Pitbull, the rest is scratch built or from my extensive pile of junk and left overs
http://img.photobucket.com/albums/v2...psx3x1phfs.jpg
http://img.photobucket.com/albums/v2...pspspss6qw.jpg
http://img.photobucket.com/albums/v2...psd8ho84en.jpg
http://img.photobucket.com/albums/v2...psqhe3md0j.jpg

sweet entries Waz and Dedman, I have only just clicked what this thread is about !

good luck to all the entrants

As we cannot enter PBG GOTM too many good builds not being showcased anywhere else and hope to see many more as others catch on to the spirit of this thread.

great idea Waz, makes sense. I got a DIY uke I started about 2 years ago and been 2 busy to get back onto

Here is your new found inspiration then?

haha Waz I lost interest in the uke, maybe if I got a piezo pickup in it, my instruments have to be able to make big noise.

I'll get around to it someday, I still got a pile of kits about 8-10 high untouched

Saving them up for a rainy day? Believe it rains lots in Perth during winter.

Apologies for not responding earlier.

I've set up a GOTY Comp for non-PBG kits and scratchies here.

We'll open a Poll in December so all registered users can cast their vote.