-
Hi all,
this has been a long project, started as a lump of oak I found on a verge covered in ugly green lead paint, and this is what turned out. It's the thickness and weight of a Les Paul and early test play it sounds good. I just used the neck and hardware from a PBG SG-1F kit. It's my 1st scratch body glue in neck so nervous moments getting the neck glued in the right position !
I gave the body heaps of curing time between gloss coats and the finish is quite glossy.
http://pitbullguitars.com/wp-content...8-23.47.44.jpg
http://pitbullguitars.com/wp-content...8-23.48.03.jpg
-
here's 2 more pics, the control cavity isn't the same shape as the cover provided so I'll cut one to suit. Wiring of a single neck SG is about 200 times easier than a double neck SG !!
http://pitbullguitars.com/wp-content...8-23.48.28.jpg
http://pitbullguitars.com/wp-content...9-00.13.07.jpg
-
Noice work there Woks!
Well done mate!
-
That's come up a treat! Well done!
-
-
-
Thanks fellas. DB this is the same wood as popeyes surfer girl SG we need to fix. Happy how it turned out. Time to bang out some accadacca chords!
-
-
-
-
looks fantastic, well done!
