Printable View
Hi all.
Quick question, thinking about another project... on the Pitbull site they have body only (tele style).
Has anyone done a project starting with one of these and then buying a fender neck from somewhere like the https://stratosphereparts.com ?
Is the bolt on neck always a standard size? What are the gotchas to look out for here..?
Sent from my iPhone using Tapatalk
I’ve done the pbg strat body and made my own neck, I used a fender standard neck profile and it fit well. Only minor sanding adjustment on body and neck was needed, mainly in the corners.
one would imagine a fender spec neck should be okay, but there’s always the chance of a Monday morning or Friday afternoon production piece.
I am doing a build the other way round. I have a pitbull neck that I am putting on a no-name fender body from eBay. Fit is fine.
Sent from my ONEPLUS A3000 using Tapatalk
I've done it both ways also. A Pitbull neck fitted quite well in a Squier Tele body.Quote:
Originally Posted by fender3x
Pitbull STA neck fitted quite well into 2 non-Fender spec bodies.
Looking at that site makes me think it's aptly titled.
Once you factor in U.S. exchange rate, and the the shipping.
cheers, Mark.
I started thinking along the same lines as you PShilling, and ended up just buying a well worn 2009 Mexican Standard Fender Tele on gumtree for less than I could land a neck alone into Aus. I called around a whole bunch of guitar shops up and down the east coast trying to get a good lead on new or used Fender or AllParts necks, and they all pointed me to Stratosphere.
There doesn't seem to be much of a market place for just necks here in Aus - check out the classifieds and see what you can land as a complete guitar for a refinish project.... I've got this Candy Apple red -> Aztec gold hanging in my closet hardening at the moment! Plus the benefit that it has picked guard, control plate, pickup etc (I ordered a new bridge, pots, orange drop cap and neck plate for it though)
Attachment 39320
Right... good thinking! Gumtree etc... full of parts that just happen to be whole guitars!
Sent from my iPhone using Tapatalk
I avoid the stratosphere just because of their ridiculous international shipping prices. Great selection of parts, but just not economically feasible.
HereIsJT's suggestion is one I would consider with one exception, I hunt for used Squiers. If you know what to look for there are older models and certain years that were made to Fender dimensions. Also you can pick up a used Squier Bullet cheap as chips (again older models tend to be better quality and some are full thickness bodies). I personally think the older Bullet necks are better than most no-name aftermarket necks out there. The fretwire material is probably the biggest shortcoming, but certainly serviceable and easily replaced if/when needed.
It's good to hear from others that there is compatibility between the PBG neck pockets and genuine Fender necks. I would have been very sceptical based on my own experience of combining genuine and non-licenced parts manufactures.
Look forward to seeing which way you go and what your build winds up being!
Wow! I had not looked at their prices. I should say that the Pitbull bass neck fit well on the $35 body I bought on ebay.Quote:
Originally Posted by king casey
The price on the Stratosphere is not bad for a licensed product (not factoring in shipping to AUS), but it seems like a lot. The last neck I purchased was under $40 US on ebay. It was a finished Kmise neck that required a bit of work on the frets, but it was a good shape and is a good player, and has a real rosewood fingerboard (real wood anyway...not sure it's real rosewood, but it looks nice...
Can't you get a decent Chinese neck there?
Have you had a look at Guitar Aust?
https://www.guitaraust.com.au/neck/n....html?___SID=U
Those are definitely closer to my price range.Quote:
Originally Posted by jonwhitear
However you get a better bargain here under your nose
https://www.pitbullguitars.com/guitar-necks/
I've gotten a neck off e-bay but it was a 24" mustang style which are difficult to get for a reasonable price.
Not the greatest, but I pulled the frets and re-configured the headstock to suit my preference.
cheers, Mark.
You can definitely pick up some great Squiers, I think the ones that are about 15 years old or so seemed to be better dimensions and more solid bodies (full thickness) but the necks are all the same. I just didn't have a Fender headstock in my lineup, so I was shopping for brand :)
Quote:
Originally Posted by McCreed
You can definitely pick up a brand new Squier Mustang cheaper than buying an aftermarket neck for one.Quote:
Originally Posted by HereIsJT
cheers, Mark.
In case you're not aware, Strat and Tele pockets are different shapes at the ends - Strats are more curved, and Teles are flatter with squarer shoulders.