-
TL-1TB was my first choice and will probably be what I end up getting. I think it would look sweet with a black stain and maybe something like this with a sweet old school hotrod print
https://digital-photography-school.c...y-diy-project/
I'm second guessing because I have a Telecaster already, though it is a MIM one I use as my backup for gigs.
We shall see.
Once I fix up the nut on the MB-1 build and touch up a couple of things I'll post some pics, then, I'll swap out the pups for the two black ones without covers I have, see how that looks. Pablopepper was kind enough to donate a neck one to go with the Seymour Duncan Custom Custom I already have :)
Robbo
-
I've printed onto grease proof paper with a laser printer then ironed the image onto timer with good effect as well.
-
Just ordered the TL-1TB, now we wait...
Robbo
-
2 Attachment(s)
Taking this little birdy out to two gigs this weekend so shouted her a nest.
Attachment 20287
Attachment 20288
It doesn't fit so well so I will either grab some foam to pad the spare space out a bit or, if I'm feeling adventurous, remove the cover and felt stuff and trim it to size.
We shall see.
edit: need to reinstall the TRC. Took it off to replace the nut...
Robbo
-
After using for two gigs a few things I noticed. I really like playing this guitar. I hope to post video in a week or so.
The edges of the frets are sharp. Not noticeable until a couple of hours into a gig. I will dress the ends during the week.
The guitar defaults to a headstock down position with the guitar straps where they are. I need to move the strap to a more neutral position.
All in all, well happy...
Robbo.