Well after a bit of a lay off due to being absolutely flat out at work I'm back.Quote:
Originally Posted by wokkaboy
I have had to re-work the neck joint angle to get the correct string adjustment range. The neck as it came was incorrect in angle and meant that when you adjusted the string height on the neck they were then a mile away in height from the pick ups with saddle very high in its adjustment range. ( I believe others have had this issue as well?). Lucky I used Tightbond which released the neck quite easily with a bit of heat. A quick plane to the base of the neck joint to give me the correct angle and I've just now re- set the neck back in place. Much easier job than I thought.
Will post more photos once complete.
Cheers
Gary
