Ah. Outlay, not inlay. ;)
Printable View
Ah. Outlay, not inlay. ;)
Hah!!! Had me fooled! Good stuff.Quote:
Thanks guys, but its not beyond your skill set! its just an inlay sticker...
A phat dog ear P90 has been wound and fitted!!https://uploads.tapatalk-cdn.com/202...067bcccead.jpghttps://uploads.tapatalk-cdn.com/202...970f75703f.jpg
Sent from my Pixel 3 using Tapatalk
Ohhh yesss baby! Drooling. And I absolutely cannot wait to hear how it sounds dude.Quote:
Originally Posted by Andy40
Handwound awesomeness no doubt. Whats it reading?? What pots and cap values are you going to try
And what gauge wire? And magnet type? Alnico V?
Magnet: Alnico 5
Wire: 42 AWG Plain enamel (From Brocott in the UK)
Wound counter-clockwise
Its reading at 8.65k Ohms Resistance and 4.91 Inductance.
Wiring complete...nice and simple. First time I've used solder lugs. I'll be using this more often!!!https://uploads.tapatalk-cdn.com/202...e41f272bb9.jpg
Sent from my Pixel 3 using Tapatalk
Bit of fret work on a wet weekend.https://uploads.tapatalk-cdn.com/202...b864126646.jpg
Sent from my Pixel 3 using Tapatalk
I gotta say I'm impressed with the kit bridge. It intonated perfectly first go!!!https://uploads.tapatalk-cdn.com/202...1a8cf412b7.jpg
Sent from my Pixel 3 using Tapatalk
https://uploads.tapatalk-cdn.com/202...e41f272bb9.jpg
The hot leg of the capacitor looks dangerously near shorting out on the back of the tone pot. I'd have stuck some heat shrink on it or else soldered it to the pot lug much nearer the lug.