Woltz's 2nd Scratch Build

Quote:

---

Originally Posted by fender3x

I am impressed the degree to which you have taken the idea of "scratch" build. This is the scratchiest I have followed.

---

Haha hopefully it actually turns out to be something usable and not just a piece of wall art.

Had a small amount of free time last night and my electronics had arrived in the last couple days so thought I'd do the wiring harness.

Here is my drawing based off different diagrams and images around the internet.

https://i.imgur.com/5zUe5Hv.jpg

And a few photos of it all done.

https://i.imgur.com/bFKZzyR.jpg

https://i.imgur.com/L0qGp0E.jpg

https://i.imgur.com/I36k8OT.jpg

Pickup wired in to test everything by holding the pickup up to the strings of one of my other guitars.

https://i.imgur.com/S1WYl4x.jpg

Quote:

---

Originally Posted by Woltz

In regards to the Sea Foam Green, maybe we need a Sea Foam Green appreciation thread specially for Frankie haha.

---

Quote:

---

Originally Posted by Sonic Mountain

Hah, he'd love that.

---

Quote:

---

Originally Posted by Bakersdozen

I'd be all over that like green foam on the sea !

---

Im feeling sea sick...or, more accurately, sea foam green sick.🤢

Quote:

---

Originally Posted by Woltz

To be honest I also wouldn't mind have one of your Deluxesters in my collection because I really dig the shape, particularly.

---

By the seven hells YES!😁😁 I’m looking forward to a nice blank deluxester canvas! MWAHAHAHAHAHA!

I like that loom, so clean

Quote:

---

Originally Posted by FrankenWashie

By the seven hells YES!😁😁 I’m looking forward to a nice blank deluxester canvas! MWAHAHAHAHAHA!

---

I'll get there eventually!

Quote:

---

Originally Posted by FrankenWashie

Im feeling sea sick...or, more accurately, sea foam green sick.🤢

---

I suppose i wouldn't like it either if I turned that color.

You haven't wired it exactly as per your wiring diagram have you? Those tone pots are slightly different as the other end of the track isn't grounded (not that it really matters).

But I would definitely have put some heat shrink over the selector switch connections. So easy for one of those to short to ground or permanently make.

Quote:

---

Originally Posted by Simon Barden

You haven't wired it exactly as per your wiring diagram have you? Those tone pots are slightly different as the other end of the track isn't grounded (not that it really matters).

But I would definitely have put some heat shrink over the selector switch connections. So easy for one of those to short to ground or permanently make.

---

Good spot Simon. Most of the schematic is based off Rick's current schematics but I made some changes based on what I'd seen around. The other change is the push pull pot to incorporate the extra cap.

I'll give some thought to the heatshrink or other methods to make sure there is no accidently grounding.

Sent from my SM-G960F using Tapatalk

Without heatshrink, I'd bend the two outer contacts well away from the centre, and the two inner ones a bit further away from that central ground lug. They are all very close together if left parallel.