April GOTM

Printable View

Show 40 post(s) from this thread on one page

30-03-2017, 11:56 AM
Chuck

Quote:

Originally Posted by Zandit75

Nice one Chuck!!
I still think you should have covered the trem cover with surfboard grip tape!!

Just for you I will hunt some down to at least see what it looks like!!
30-03-2017, 12:54 PM
Zandit75

Quote:

Originally Posted by Chuck

Just for you I will hunt some down to at least see what it looks like!!

Haha, good stuff!!

Then, just to top off the look, rub surfboard wax all over it!!! :p
30-03-2017, 04:08 PM
Adam Barnes

3 Attachment(s)

Hi guys got some time today to finish off and thought id better enter GOTM. TAttachment 18446 Attachment 18447 Attachment 18448he only mods are the dirty finger pickups and the crome knobs. Sounded unreal but is going out of tune due to the strings needing to settle in. I'll put some better ones on over the weekend and do a sound demo
Thanks to all the guys for the help and advise
Barnseys ES1TL
30-03-2017, 04:10 PM
Adam Barnes

3 Attachment(s)

Attachment 18449 Attachment 18449 Attachment 18450 Attachment 18451a couple moreAttachment 18456
30-03-2017, 04:11 PM
wokkaboy

looks great Adam, you just need to post a close up of the body (entry conditions). Don't rush a sound demo, newly built guitars need a bit of play in time and probably a new set of strings.
30-03-2017, 04:15 PM
Adam Barnes

2 Attachment(s)

Attachment 18458 Attachment 18459a photo with my bought guitars
30-03-2017, 04:18 PM
wokkaboy

nice collection Adam, is the neck pup surround on the green LP Epi broken ?
30-03-2017, 04:23 PM
Adam Barnes

Thanks wokka yep it is
31-03-2017, 04:54 PM
nitroburner1000

Quote:

Originally Posted by Chuck

Figured I might as well add my latest to the mix! The build is based around a stock ST-1M kit and inspired by my favourite surfboard. Painting was done with MTN rattle cans, and the keyline is automotive pinstripe tape. There was my usual body reshaping, and instead of the normal pickups I ordered a neck and bridge Entwisle AS57. The wiring features a Freeway Ultra switch which provides the following: Positions 1, 2 and 3 are neck, both, bridge, Positions 4, 5 and 6 are series in-phase, series out-of-phase and parallel out-of-phase. The little toggle switch is a simple bright switch. The master vol works in all switch positions as does master tone. Bridge volume works in position 3, or adjusts the mix of the bridge pickup in pos 2, 4, 5 and 6. I also built a fuzz face clone pedal to go with it.

It's been a very interesting exercise in trying things I haven't done before so pretty satisfied with how it all turned out! Apologies I haven't updated the pics from the build diary but have had some camera/phone issues (and, yes Wok, I have taken the stickers off the back of the tuners!)

Attachment 18441 Attachment 18442 Attachment 18443 Attachment 18444

Wow, i love your build, the switching setup is amazing, a No.1 contender.
31-03-2017, 04:56 PM
nitroburner1000

Quote:

Originally Posted by Adam Barnes

Attachment 18449 Attachment 18449 Attachment 18450 Attachment 18451a couple moreAttachment 18456

i love the colour, its so unique and unusual, great job Adam, you can see the time spent on this one.

Show 40 post(s) from this thread on one page