AG-1 perhaps i am Tony Iommi?

Ok.
Had an operation, moved house, set up guitar room, setting up garage/motorcycle workshop.
Back to the sg shaping…….


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by OliSam

Ok.
Had an operation, moved house, set up guitar room, setting up garage/motorcycle workshop.
Back to the sg shaping…….


Sent from my iPhone using Tapatalk

---

Wow, lots going on. Hopefully your recovery has gone well. Good to see back in action!

Hope you are on the mend. I find a mix of motorcycles and guitars the perfect remedy for most things :)

Quote:

---

Originally Posted by Simon Barden

The higher the pot value, the higher the pickup's resonant peak moves up and the brighter the sound, but there's no real point putting more than a 1Meg pot in as you get into smaller and smaller exponentially decreasing increments. With more resistance between the signal and ground, you get a tiny bit more output (some people fit a 'blower' switch which bypasses the volume and tone pot for maximum pickup output), but it's not a huge amount. You won't get any brighter than the pickup with no volume pot attached.

1 Meg pots are really for overwound, high output pickups to try and add as much treble back as you can. If you've got a pretty standard PAF-level humbucker, then 520k-550k is about right. You can make a pickup sound a bit too bright for its own good. And intermediate value pots between 500k and 1 Meg are hard to find and not guitar-orientated, so you may find PCB mounting ones, but not a standard guitar sized one. You can fit a parallel resistor on a 1 Meg pot to get an overall lower resistance, but it also modifies the shape of the taper.

---

What an awesome response, you really are a mine of info Simon!

Quote:

---

Originally Posted by Andyxlh

Hope you are on the mend. I find a mix of motorcycles and guitars the perfect remedy for most things :)

---

thanks mate. youre totally correct!
once my strength is back i cant wait to hit the road again. My last trip was a 12 day, 5,000k run down to tassie and back....sensational roads....
funny thing is that when i go away for a while i really miss my guitars...(oh...and the wife and kids of course)

Lots of planning. Line marking. But a little afraid to start the re-shaping.
https://uploads.tapatalk-cdn.com/202...b5179e56b5.jpg
https://uploads.tapatalk-cdn.com/202...a769b4cb07.jpg


Sent from my iPhone using Tapatalk

Top and front view so farhttps://uploads.tapatalk-cdn.com/202...b5d8d8ba3a.jpg
https://uploads.tapatalk-cdn.com/202...6d18c6d668.jpg


Sent from my iPhone using Tapatalk

I have also found a groovy coin to embed in the headstock!!
https://uploads.tapatalk-cdn.com/202...7d9930aa5c.jpg


Sent from my iPhone using Tapatalk

Cleaned up more coins in cola overnight to assess my options for embeding in the headstockhttps://uploads.tapatalk-cdn.com/202...6f535d0a67.jpg


Sent from my iPhone using Tapatalk

Also put a wenge veneer on the front of the headstock
https://uploads.tapatalk-cdn.com/202...cf4ef9af13.jpg


Sent from my iPhone using Tapatalk