Woks' collection can be seen with the naked eye from the moon....
Printable View
Woks' collection can be seen with the naked eye from the moon....
I think Woks beats these pros:
http://proguitarshop.com/media/cms/blog/Tele_John_5.jpg
https://s3.amazonaws.com/pics.fandal...CE0A18F5D7.jpg
http://www.slashparadise.com/equipme...collection.jpg
Show us your entire collection!
Anyway I haven't been posting much but managed to get some work done.
http://i23.photobucket.com/albums/b3...pskiobxssv.jpg
Routed the channel wires.
http://i23.photobucket.com/albums/b3...psi8rbfuqj.jpg
Glued it all up. Still don't have enough clamps! Some areas still had gaps. Argh!
http://i23.photobucket.com/albums/b3...psx3inllpd.jpg
Fresh off the clamps.
After trimming the top and with some mineral spirits, the flames really popped.
http://i23.photobucket.com/albums/b3...pswnzqnpsz.jpg
http://i23.photobucket.com/albums/b3...pselknwc19.jpg
http://i23.photobucket.com/albums/b3...psfsjwa6lz.jpg
Started drilling for the truss rod channel.
http://i23.photobucket.com/albums/b3...ps5e2dowbf.jpg
And used a 6mm bit with a router straight edge guide.
http://i23.photobucket.com/albums/b3...psw6g5azbp.jpg
great progress Simon, that flame top looks unreal ! Will this be a carved top is there enough meat on the flame maple drop top ?
love the axe collections, I'd swap my collection with Slash or Joe in a heartbeat haha
Yes I would trade all I have for their collection too!
Unfortunately it's only 7mm thick so I'll only use it as a drop top. I did consider doing a little carving with binding to hide the ugly gaps where I didn't have enough clamps. I'll think it through for now until the neck is done.
Hey Simon, is the white bucket and Shop vac in the back of shot a home made dust collector system?
looks like it Franken, maybe a home made dust extraction system
Good eye Franken! It is just a cheap solution to my dust problems. The vacuum itself is a cheap ozito wet and dry.Quote:
Originally Posted by FrankenWashie