Printable View
No videos yet guys. I gotta recheck the wiring, something just ain't right! Making a continuous sound... Wasn't doing it the other night :/ not quite sure how to explain or know exactly what it is :( back to the soldering board tomorrow night hopefully :)
Make sure the output jack is wired the right way around... If not you get continuous sound... And others electrical gremlins
Could also be a grounding issue
One of my favorite mistakes.... I am a complete numpty at wireing :pQuote:
Originally Posted by stan
First time round it was great, then trying to get it in the cavity, I think I stretched something somewhere :/Quote:
Originally Posted by dingobass
Might get some braided cable and redo the whole lot...
Yhep.
As the old saying goes, if at first you don't succeed, throw a massive tanti and then go and have a nice cold beer :p
Haha sounds good! Though I'd take a cider :pQuote:
Originally Posted by dingobass
Sounds like you might have created an unintentional short-circuit, or maybe a connection broke, are you getting a continuous humming-noise?
Yeah it's a continuous hum. I've checked all the connections and they're all fine?! :/Quote:
Originally Posted by DrNomis_44
Shaz have you pulled the wiring out to have a good inspection ? a hum could mean a bad earth to a pot/switch or output jack. Have you run an earth wire from a bridge post and all 4 pots are earthed ?
can you please post a close photo of the wiring loom may give us some answers
Also check the 3 lugs on the volume pots aren't making contact with neighboring lugs.