Printable View
got a bit more done on the LP, I call it the tiger now. Neck fret levelled, it was already pretty level so that was easy. Neck glued, switch wires soldered and tonerider generator pups fitted. Hopefully will finish the wiring today. Got 2 push pull pots to coil split so thats going to be fun to wire up but good experience
http://www.pitbullguitars.com/wp-con...3-15.09.04.jpg
http://www.pitbullguitars.com/wp-con...3-15.09.11.jpg
http://www.pitbullguitars.com/wp-con...3-15.09.27.jpg
These come out with mahogany necks now??? Lookin' sweet btw:-)
hey Barge, yes the LP-1M are mahogany body and neck. They are the 2nd best LP kit available I think. The spalty model takes the gold medal
Man I swear they never used to be, the very first build I did was a LP-1M and I'm sure that had a maple neck.
yer ok Barge they must have changed to mahogany at some stage. Would have been obvious the maple is a much lighter colour
Yeah that's awesome, too bad they weren't around when I was doing the Blacktop. It's the only reason I used a spalt kit is because they had a hog neck.
Love the cap & the headstock, really looks tigerish now me boy.
BTW I do like the little guitar doorknob on that shortass door 8-)
Hey Maxy, that's where he keeps all his little guitar building worker elves , how else do you think he builds 50 guitars at one time :DQuote:
/<\\/p>[]<\\/p>/Quote from maxaxe on September 14, 2014, 17:38
BTW I do like the little guitar doorknob on that shortass door 8-)
haha nice one Barge, sometimes think I could use 50 elves to help out.
That little door is the wood storage area below the pizza oven.
Got the wiring done but got no sound from the bridge pup so there must be a short somewhere. Strung it up and played through the neck pup and the tonerider generators sound good. The coil split worked well.
So all is left is diagnose the bridge pup wiring, covers on and should be ready to enter GOTM
http://www.pitbullguitars.com/wp-con...4-23.33.52.jpg
http://www.pitbullguitars.com/wp-con...4-23.34.09.jpg
http://www.pitbullguitars.com/wp-con...4-23.34.54.jpg