it doesn't say if the hv58 and the hdn pickups are coil splittable, can i wire them according to your two tone two volume wiring diagram? i don't need the coil split feature, but would it work tho?
Printable View
it doesn't say if the hv58 and the hdn pickups are coil splittable, can i wire them according to your two tone two volume wiring diagram? i don't need the coil split feature, but would it work tho?
Yep for the sanding.
Will leave the wiring question for one of the wiremiester gurus.....
Entwistle humbucker wiring (the 'standard non-split' is the bit you want). Black is your hot, red & white should be soldered together and insulated, green and shield connect to your ground. Apply that to the PBG or any humbucker wiring diagram and you should be good to go.
Yes you should be able to wire it up with two tone and two volume as per the diagram with the stock pots. With stock there would be no coil split feature, you need to wire slightly differently and use a push pull pot for thatQuote:
Originally Posted by huangmi