DB's binding jig

nice one DB, how come you cutting a new binding channel does Crusader want different colour binding ?

Thats the one, Woks.
Also cut a groove down the centre as well, Crusader has a very funky idea for the finish on this axe that is gunna rock the house down :)

sounds good Crusader's plans DB, wonder what is going in the centre strip

A length of binding....

ah ok DB that should look cool Crusader

Nice work DB. How many of these are we going to see made now I wonder? At least one in holgate I know that. 😀

cheers,
Gav.

Quote:

---

Originally Posted by dingobass

And here we have Crusaders LP getting the treatment :p

---

AWESOME!!! Can't wait to get my hands on it :)

Cheers DB thanks for the help.

Quote:

---

Originally Posted by dingobass

Yes, you feed the body around and there is enough clearance for cutaways..

The extra height is for working on Acoustic Guitars.

---

If you need to work on acoustics then (as DB will tell you) you will meed to make a 'tray' to support the acoustic guitar body as you will want the top or bottom that you will be routing to be perfectly level so that the router bit cuts evenly and straight throughout the process....also be mindful to follow the grain with the router bit to avoid tear out with an acoustic....also with an electric but its less of an issue!

Quote:

---

Originally Posted by dingobass

And here we have Crusaders LP getting the treatment :p

---

Nice work DB!

What Gavmiester said about levelling is very important.
With Crusaders body I had to shim it in a few spots to level it up.
Nothing fancy, just slivers of timber stuck down with double sided sticky tape.
However, I will make up a set of proper height adjustable feet.... One day :p