Yeah it was all prewired besides the black and orange wire
Printable View
Yeah it was all prewired besides the black and orange wire
Working fine now, thanks for all the help
Got to love Strats for having almost everything already on the pickguard. Even if you're doing it from scratch it's considerably easier ;-)
Just a tip for soldering if i may humbly interject,
its a good idea to "tin" the wires first by twisting the stripped ends and applying solder to them before you solder them onto whatever, and also there is like a thin electroplated type chromed coating on the backs of the pots and sometime other solder lug components that should be scratched off first to get a good solder join, i usually use an old knife or sand it back whatever works especially the backs of the pots, they have like a thin electroplate coating of some sort maybe zinc alloy etc, im no expert forgive my 2 cents input hope this helps someone.
I always use as much solder as i can i like a proper good solid solder connection i always try to thread the tinned wires through any holes neatly so as much metal to metal contact is obtained and i very carefully strip my wires so as to avoid loosing wire strands also.
Im no expert however so dont take my word for it just experienced a bit.
[Correct me if im wrong please]
Glad you got it going your axe looks really good in your photos if i may say.
Nice job sir.