Sonics 4th Build - YB-4 - The Steampunker Bass

250K pots as they are both single coils (though one of the P-bass pickup's split coils is RW/RP to the other one to give it noise-cancelling/humbucking properties).

If you can get them in Australia, it's worth trying a set of these Peavey bass strings as they are designed for 35" scale basses https://peavey.com/products/index.cfm/item/973/81497/

Here are a set on my rear-strung Peavey Cirrus EXP (which was quoted by them to be 35" scale but measures at 34").

Attachment 27898

You should be able to see where the string thins out. If not, I've marked the end of the thick section on this version. The G string stays the same diameter throughout.

Attachment 27899

I haven't tried a huge number of bass string types, but they feel reasonable to me.

Cheers guys.

Quote:

---

Originally Posted by Dedman

fantastic job. Now you need to start on the matching amp
Attachment 27891
Attachment 27892

---

Lol, well I have a stack of left over doo dads.... but I’m ready for something a bit different first.

Legendary build Sonic, you must so be proud of this effort.

pleasure to watch - Guvna

Quote:

---

Originally Posted by Sonic Mountain

My new saddles, knobs and a switch rocked up today. The switch I relented and chose gold, it is pretty different to the brass, hopefully it will dull down a bit with use. I did end up having to do some clearanceing on those tentacles to get it to fit, but it works OK.

https://i.imgur.com/S5y5a91.jpg

https://i.imgur.com/V5QAVcl.jpg

https://i.imgur.com/hpiiryU.jpg?1

https://i.imgur.com/uKzBsUg.jpg

So I put the kit strings on it and did a rough setup. Plays pretty well, but it needs a really good going over to be nice. All the bridge bits fit up nicely and the string through mod worked perfectly. I do have the same issue as some of the guys with the MMB kits. The strings aren't quite long enough for the 'thick' bit to go over the nut. It doesn't seem to affect the tuning.]

Jury is still out on the knobs vs cogs.. but I'm leaning towards this. I need to get some pots and work out my wiring now.

Should I be using 250k or 500k with these pickups?

---

nice one mate, that takes some imagination to come up with that concept one of the most interesting builds yet 👍👍👍

Quote:

---

Originally Posted by Sonic Mountain

My new saddles, knobs and a switch rocked up today. The switch I relented and chose gold, it is pretty different to the brass, hopefully it will dull down a bit with use. I did end up having to do some clearanceing on those tentacles to get it to fit, but it works OK.

https://i.imgur.com/S5y5a91.jpg

https://i.imgur.com/V5QAVcl.jpg

https://i.imgur.com/hpiiryU.jpg?1

https://i.imgur.com/uKzBsUg.jpg

So I put the kit strings on it and did a rough setup. Plays pretty well, but it needs a really good going over to be nice. All the bridge bits fit up nicely and the string through mod worked perfectly. I do have the same issue as some of the guys with the MMB kits. The strings aren't quite long enough for the 'thick' bit to go over the nut. It doesn't seem to affect the tuning.]

Jury is still out on the knobs vs cogs.. but I'm leaning towards this. I need to get some pots and work out my wiring now.

Should I be using 250k or 500k with these pickups?

---

Just caught up, one awesome build.

Wow, that looks fantastic!

The beast roars........

Well... not quite.

I'm waiting to be paid so I can get a few bits and pieces to wire it up, hopefully in the next week or so. I've been messing around on it a bit to help it settle. Nut needs to be a fair bit lower, but it's not terrible to play.

https://pin.it/2uojbsnp4fenk6

I found this on Pinterest Sonic and I thought it would appeal


Sent from my iPad using Tapatalk Pro