I did a test comparison of 2 wipe on polys, the Feast & Watson (oil based) I used in the red Strat, and a Minwax water based.
I was expecting the water based one to be less yellowing than the oil based product, so I stained a test bit and applied 6 coats of each side by side, with a reference strip in the middle protected by masking tape.
Minwax on left, F&W on right:
https://uploads.tapatalk-cdn.com/201...3e6316ced1.jpg
Interestingly the minwax came out more yellow than the F&W... not a lot, you can't really see it on the photo, and it could be because I applied it thicker than the other, but no benefit compared to the F&W.
Also because it's water based it seems to take some of the ink off the wood, the cloth used to apply ended up coloured purple while the other one was just the expected oily yellow... don't like the idea of removing any colour!
So I'm going to stick to the F&W. It was super easy and forgiving to apply last time and I got a great glossy finish.
So I got started with the neck and the front.
https://uploads.tapatalk-cdn.com/201...453d193b19.jpg
https://uploads.tapatalk-cdn.com/201...fa2075e569.jpg
They say it dries in 6h so I'll do the back side tonight.
Pretty happy so far.