yup very thin border to hide some glue I couldn't shift. Red is already done
Printable View
yup very thin border to hide some glue I couldn't shift. Red is already done
ok look forward to pics after the burst is done Dedman !
first clear coats are on
Attachment 13970
looks great Dedman, is that black strip around the centre to cover more glue ?
yea, it was pretty thick, by the time I'd dug it out I had to fill it with timbermate
fair enough Dedman, looks cool anyway. How did you clean the binding did you mask it or clean/scrape it after the burst ?
glad you cover your motorbikes, would hate any overspray to land on them !
I masked it then had to scrape it anyway there is always some that gets under. I just use a bit of 800 grit paper folded down to about a centimetre square and us my thumb as a guide on the edge.
me likey!!Quote:
Originally Posted by dedman
stunning day here today, I sanded and put 2 more coats on, so that's it, just final sand and polish to go on the body. Bad news is my 1k push pull pot arrived...but it's not a push pull, the idiots sent a normal one.
which supplier sent the wrong pot Dedman ? they should replace it at their cost but will delay the wiring stage