Es2v help needed

Hi All

Building a ES2V electric and was saved by the plastic tubing but have two questions. How do I earth to bridge? I have put both posts in and did note note a hole for wire access, is there one and if not how do I earth it. Second question is the timber saddle glued in place or just held by string pressure. Thanks for any advice Cheers Stu

Timber saddle should just need string pressure to hold it in. As for earthing the bridge - I believe it is via the hole, but having not done an ES (yet), I'll defer to Wokka, Dingobass or the Gavmeister on this one.

Thanks Brendan will pull out a post tonite to see if there is a hole for the wire, any more feedback on mounting the timber saddle appreciated at it appears a lot higher than the bridge and may move without glue. Thanks

I replied in your build thread.

cheers,
Gav.