Restoring a basketcase

I was doing my usual trawling for 2nd hand pick ups and came across a semi destroyed bass guitar that had a pick up I wanted, so I bought the lot and decided to restore/rebuild it.

The previous owner had taken it apart to refinish it and lost interest (I found out why, later)
It came as a box of bits, and with only a few missing pieces of hardware I had lying around was able to get it to playable condition.

And it mostly looked like this:
Attachment 5247

Looks ok, eh?
It sure played ok.

Sadly it also looked like this:

Attachment 5248

and this

Attachment 5249

So.. I haven't owned a fretless bass guitar for years, and decided it might make a good project.

At this point I hadnt made up my mind on what to do with the body.

nice one Beef, so are those pics how you got it or is the front photo after you restored it ?
fretless bass's are awesome

My word, you are on the ball. I just posted this!
No, thats the $100 wonder bass as I got it.
The Lace pick up was the clincher.

So I set about the basically pointless activity of removing the incredibly thick paint and sander sealer.
And even after about 15 coates of stripper, and a liberal dose of heat gun, it still looked like this.
Attachment 5250

The sander sealer looked like congealed honey, and while the very thin enamel(ish) gloss came off pretty easily by comparison, I was wonderign if the other gak would ever come off.

Then I realised I had access to one of these.
Attachment 5251

wow what an absolute mess Beef getting the paint off.
Yeah those flap wheel sanders are awesome. Great for sanding the cutaways and hard to get rounded surfaces

Next day I had it looking pretty much like this:
Attachment 5252
Attachment 5253

You can see the heat gun damage to the back, where it has gone orange.

My original idea was to go and copy Pino's bass in dark burst.
But in my practice room was this plank ...

Attachment 5254

Stupid ideas began to form in my mind.

Meanwhile, I needed to do some ironing.

Attachment 5255
Attachment 5256

And they all came out as neatly as a meth-head's teeth. (Probably neater)

come up pretty good Beef considering how thick the paint and sealer was.
Whats the idea of heating up frets before you remove them, does that make them easier to remove ?
That's a new idea !
What colour are you staining/painting it and will you fill the pickguard screw holes and leave the pickguard off ?

My most played instrument doesnt have fret lines or markers, so I wasnt keen on the whole lined fretboard idea, so I tried to match things up.
Attachment 5257

Filling the fret slots with mahogany vaneer and glue from the nice timber yard out Windsor, NSW way.

Attachment 5258

Cutting them off with thing Id never heard of called a Japanese saw.
Sanding them down and staining the board a few shades darker.

Attachment 5259
Attachment 5260

After a bit of a sand and tidy up, I realised all the neck side position dots are in the wrong place, so I whipped them out, got some dark wood filler, and also addressed some minor nicks in the neck, and restained the whole neck a few more times.

Attachment 5261

Attachment 5262

I also took the time to remove the original logo from the headstock.
Interestingly the timber had 'aged' around the big black logo, but leaving the unstained neck out on sunny days resolved this in about 20 hours of direct sunlight.

Attachment 5263


The frets come out easier if you heat them up, just softens up the glue. Some people use a soldering iron.

wow looks excellent Beef. What did you use to stain the fingerboard ? looks ebony colour - well done