So I got a bit more done.
Neck carved.
Drilled the holes to attach the neck.
Drilled the string-through holes and holes for the bridge mounting screws. Unfortunately the alignment of the string-through holes on this one wasn't great but I'm not going to bother plugging and redrilling. I also did the belly carve and started tidying up both the belly carve and the arm carve.
I just need to tidy up a small flat spot on the fretboard, file a couple of high spots on the back of the neck and then fret the neck and I'll be on the sanding and finishing.
Sent from my SM-G960F using Tapatalk
Reply With Quote