Hello,
just new here. I received my 1st kit (small scale bass). There are some things/features I am not sure if this is "normal" as for such parts that are not finished. On the other hand I am not sure if it is possible to eliminate by finishing. I made some pictures (please check pdf attached).
Maybe someone could give me some hints and help me here as I am not sure how to continue. Especially the issue with the 2nd and 3rd fret seems difficult.
Thank You.
Wilkommen Schmallkowski!
I would send these photos to adam at pitbull guitars. This is not the quality he would expect in his products.
Unless you have fully equipped luhtier's workshop, and a lot of patience, i am not sure you can correct these issues, and I am not sure that you should have to for a new kit.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Welcome.
Ouch! That has to be the worst example of the engineered rosewood fingerboard I’ve seen. Please let Adam know there are some serious quality issues on that neck that he will need to feedback to the factory.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Thank you for your feedback. That helps me a lot. For me it is very difficult to estimate what I have here, as it is my 1st DIY. Then I will contact Adam. Thank You.
I contacted Adam and he agreed about the quality and I will get an new kit sent. Well that is a great response.
Thank You.
Posting Permissions
Reply With Quote