Results 1 to 5 of 5

Thread: Greetings from Germany

  1. #1

    Greetings from Germany


    just new here. I received my 1st kit (small scale bass). There are some things/features I am not sure if this is "normal" as for such parts that are not finished. On the other hand I am not sure if it is possible to eliminate by finishing. I made some pictures (please check pdf attached).

    Maybe someone could give me some hints and help me here as I am not sure how to continue. Especially the issue with the 2nd and 3rd fret seems difficult.

    Thank You.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	pic_1.jpg 
Views:	30 
Size:	68.1 KB 
ID:	32097   Click image for larger version. 

Name:	pic_2.jpg 
Views:	33 
Size:	61.3 KB 
ID:	32098   Click image for larger version. 

Name:	pic_3.jpg 
Views:	30 
Size:	52.5 KB 
ID:	32099   Click image for larger version. 

Name:	pic_4.jpg 
Views:	29 
Size:	55.2 KB 
ID:	32100   Click image for larger version. 

Name:	pic_5.jpg 
Views:	27 
Size:	37.5 KB 
ID:	32101  

  2. #2
    Overlord of Music FrankenWashie's Avatar
    Join Date
    Jan 2016
    Glebe, NSW
    Wilkommen Schmallkowski!

    I would send these photos to adam at pitbull guitars. This is not the quality he would expect in his products.
    Unless you have fully equipped luhtier's workshop, and a lot of patience, i am not sure you can correct these issues, and I am not sure that you should have to for a new kit.
    FrankenLab Guitar Experiments.
    Making bad ideas a reality since 2016!

  3. #3
    Overlord of Music Fretworn's Avatar
    Join Date
    May 2013
    Hornsby Area, Sydney, NSW

    Ouch! That has to be the worst example of the engineered rosewood fingerboard Iíve seen. Please let Adam know there are some serious quality issues on that neck that he will need to feedback to the factory.

    First Act ME276 (resurrected curb-side find)
    Scratchie lapsteel
    Custom ST-1 12 String
    Scratch Lapsteel
    Meinl DIY Cajon
    Cigar Box lap steel

    Open D/Standard Double 6 twin neck

  4. #4
    Thank you for your feedback. That helps me a lot. For me it is very difficult to estimate what I have here, as it is my 1st DIY. Then I will contact Adam. Thank You.

  5. #5
    I contacted Adam and he agreed about the quality and I will get an new kit sent. Well that is a great response.
    Thank You.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts