Proceeding on, hopefully the neck doesn't end up failing when i get to the end point... hahaha *stress!*
Been sussing the scale length, wasn't too sure as the product description for AG-1F or other similar AG series guitars doesnt have it included (i could be blind), but with the neck slotted mostly all the way in so the neck pickup fits and covers all of the pickup hole it sits close to 628. Gibson SG guitars have a 628mm scale length, so i thought going with that would be safe.
Pic shows with the saddles all the way forward, high E string would sit at 624mm, saddle can extend back to 630mm.
Not in the pic, but the low E sits at 626mm
Will mark off the neck/body point on the neck so i can tape that off and get to the head stock shaping.
Then to sanding and finishing!
Reply With Quote
