Is it possible to route all ground wires (Pickups, Input, Bridge, etc) together into one of those Lego like electrical blocks and then a single wire out the other side to the pot?
Sent from my iPhone using Tapatalk
Is it possible to route all ground wires (Pickups, Input, Bridge, etc) together into one of those Lego like electrical blocks and then a single wire out the other side to the pot?
Sent from my iPhone using Tapatalk
I've done something very similar in that I bunch my grounds together as much as I can, not as tidy as your idea, but same principle with no issues.
#1 LP1-SS
#2 Non PB Vintage Strat Rebuild
#3 TL1 - Custom
#4 ES-12G (now converted to ES-1)
#5 RC4
#6 STA-1HT
#7 Non PB 52 Tele replica
#8 Coming Soon: 1970's Japanese Les Paul Special Resto.
It may be that your whole purpose in life is simply to serve as a warning to others
Thanks. I’m building an MKA-2 where everything is connected to the scratch plate. It would make future disconnecting easier, just releasing the earth ground from the bridge.
Sent from my iPhone using Tapatalk
It's called "star grounding".
I also do it, but I use a ring connector similar to the linked photo.
ring connector - star ground
FTR, that's not my work, just a photo I quickly found online.
There is a bit of controversy over star grounding and ground loops, and noise, whether or not to do it, yada-yada-yada, but I've never had an issue. I just find it easier and tidier like RossCo.
Making the world a better place; one guitar at a time...
Posting Permissions
Reply With Quote