Upgrade pots/switch

[TZK321]

Hi FCD.
Reading your other post, I know you got a TL kit. It's worth noting that if you want to upgrade the pots, specifically to 24mm pots, the control cavity in the PBG TL kits need to be widened to accommodate the larger pots. This means routing (or other similar method) .......

How much wider does it need to be? Can this be done with a Dremel?

[king casey]

How much wider does it need to be? Can this be done with a Dremel?

Couple of mm (edit) both sides.
I used one of these.
https://www.bunnings.com.au/ozito-17...l-kit_p6290175

cheers, Mark.

[fender3x]

How much wider does it need to be? Can this be done with a Dremel?

I'd use one of these. The nice thing about these is they are self centering. Close to idiot proof, which appeals to me. Not completely idiot proof, tho, which is how I know you need to really fasten down that control plate before trying to drill out the hole so you don't turn it into a mini lawn mower.

Sent from my ONEPLUS A3000 using Tapatalk

[fender3x]

Of course...Alps, Alpha and Gotoh pots won't require changing the control plate...

Sent from my ONEPLUS A3000 using Tapatalk