Thinned from the back after the veneer. Hope this isn't going to stuff anything up? Sent from my MI 6 using Tapatalk
Have just finished soldering. Could someone check if I have everything right? Sent from my MI 6 using Tapatalk
Looks good except you’ve got the hot and ground reversed on the jack lugs, just swap them around. And, make sure the capacitor leg that connects to the pot lug isn’t brushing/can’t touch the tone pot body/casing.
Scott.
Thanks for that, will swap the wires around. Sent from my MI 6 using Tapatalk
Forum Rules