Has anyone had this issue? While I setting up the EX-5, I removed the strings to adjust the neck, bridge...and the nut fell right off. I glued it with Titebond wood glue, and let it sit for 24 hours. Set up the bass again. I noticed the nut sliding as if the D, and G were pulling it out. Repeat Glue. Same thing happened. Before the third time, I thought that maybe I have 2 issues going. Perhaps the glue needs longer due to humid conditions, and maybe I used too much glue the second time. I sanded the glue off and then was very conservative in application. This time I let it sit for almost 48 hours before stringing. It lasted a little longer, but the nut is coming out again. Suggestions?
Reply With Quote
