Had this hanging around for 12 months or so waiting for inspiration... Going with a money theme as it came with gold hardware! Have gathered all my old USD and some gold and copper leaf left over from my daughter's art project, what could go wrong?
Had this hanging around for 12 months or so waiting for inspiration... Going with a money theme as it came with gold hardware! Have gathered all my old USD and some gold and copper leaf left over from my daughter's art project, what could go wrong?
Well let's see, shall we?
Not sure if I'm winning or losing here. Mixture of Copper and gold leaf, rather than paper glue I'm using contact glue to hold it on to make it stronger. Bit of a sticky mess with bits missing, but I like the colour contrast and when all covered with leaf and clear it should come up nice and smooth. We will see...
oooh!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Well, it seems to have dried OK and is securely attached to the timber. Not sure if I like it, but I'll let it set and see.
Plan is to do the front in USD and have a dollar bill headstock, with all gold hardware.
Not sure why, really. Can't face another timber stain/sunburst or conventional finish I guess........