Anybody have an idea? I want to build a thinline ATL-1SW with no pickguard. Anybody done that?
Thanks in advance guys!
Anybody have an idea? I want to build a thinline ATL-1SW with no pickguard. Anybody done that?
Thanks in advance guys!
Never done a thinline but anything without a pick guard usually looks better IMO.
That said, there may be some pickup mounting & routing holes to hide. Just need a bit if creativity to figure that part out, even if it is by using a small part of a scratch plate.
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
yeah, on a thinline, the tone controls are "floating" on the pick guard. Probably have to just trim back the stock plate... wondered if anybody had done that. Thx.
Maybe not on that kit, but if you dig through the build diaries you will find examples of this with other kits.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
None needed for the bridge pickup if you use a standard tele bridge. You could use a pickup ring for the neck pup, like this...
But I am not sure what you do about the control cavity. If the top will be a solid color there are ways to do it, but if not there's no way you can match that grain.
You could see if you can find a fender Jaguar control plate or a Jazz bass control plate that will cover it...sort of like Jaco Pastorius...
Or maybe make one out of 3mm ply wood for the control cover rout. It would look just like a 3 ply plastic one if you bevelled the edges but could be stained to match top or in any colour you like.
Chrome plate idea also has merit but with that slight curve there might not be enough coverage from the metal plate.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Thanks for the suggestions everybody!
Why not have the control cavity in the back? It would be a custom order but I'm sure this could be accommodated.
What's the delta in price for a simple custom order like control cavity in back? Anybody got an idea? I haven't bothered to request a quote, just figured it would be $$$ ??