Page 9 of 9 FirstFirst ... 7 8 9
Results 81 to 90 of 90

Thread: My first PBG TLA-1 build

  1. #81
    Overlord of Music FrankenWashie's Avatar
    Join Date
    Jan 2016
    Location
    Glebe, NSW
    Posts
    4,378
    Quote Originally Posted by DarkMark View Post
    Sometimes I wonder, Ďis Igor the voice inside Frankieís head, or is FrankenWashie the voice inside Igorís head?í Either way they are probably not worlds apart.
    DM, I often wonder that myself
    I have too many guitars...said no guitar player. Ever. Especially not on this Forum!

  2. #82
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    I did a little more to it tonight, shaped the headstock, applied more paint to the body.
    I did have issues with paint cracking again in one spot but I just sanded that area down and sprayed again.

    Iíve only used one spray can. Would you advise I get another and apply more coats?
    When it has dried should I be lightly sanding with 800 grit then eventually apply the clear coat?


    Sent from my iPhone using Tapatalk

  3. #83
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    Ordered my tru oil today from Pit Bull so hopefully wonít be too long before I finish the neck


    Sent from my iPhone using Tapatalk

  4. #84
    Member
    Join Date
    Feb 2019
    Location
    Petersham NSW
    Posts
    29
    Looking good. That colour works well with the maple.

  5. Liked by: Iíll give it a go

  6. #85
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    Quote Originally Posted by Dan_B View Post
    Looking good. That colour works well with the maple.
    Thanks Dan


    Sent from my iPhone using Tapatalk

  7. #86
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,221
    Might be best to leave neck unfinished until re-fret job has been done as you may want to seal the fret board too and thus make it trickier to remove frets if done first.

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

  8. Liked by: Iíll give it a go

  9. #87
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    Quote Originally Posted by wazkelly View Post
    Might be best to leave neck unfinished until re-fret job has been done as you may want to seal the fret board too and thus make it trickier to remove frets if done first.

    Sent from my SM-A520F using Tapatalk
    Thanks Wazkelly, I did get the frets re-crowned in the week. So hopefully all is good now.


    Sent from my iPhone using Tapatalk

  10. Liked by: wazkelly

  11. #88
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    So I think I have put my final coat of paint on the body, Iím very happy with the colour.
    Is my next move to fine sand it with those 2000 grit pads from Repco then apply the clear coat?



    Sent from my iPhone using Tapatalk

  12. #89
    Member Iíll give it a go's Avatar
    Join Date
    Apr 2019
    Location
    Perth, south of the river.
    Posts
    139
    Well my final coat went on and Iím leaving that for a week while in Melbourne.

    The True oil is going on really nice. And the neck is as smooth as a babyís bum.



    Sent from my iPhone using Tapatalk

  13. #90
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,221
    Looking good

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

Page 9 of 9 FirstFirst ... 7 8 9

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •