I built a TLA, finished in dingotone natural clear. It痴 a solid unit, the ash finishes well but has a tendency to splinter and tear out when drilling or routing.
if you want a flat finish you値l need to grain fill. The ash in mine had some nice grain feature that ended quite prominent as the finish sunk into it.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Ash is also a fair bit heavier than basswood if that is a consideration. I've built 2 basswood tele's and they are a lot of fun and very straightforward. Sometimes the bridge cavity needs slight enlargement, in which case the basswood is far easier to work if you have limited access to tools.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Thank you both for your feedback, it was really helpful. Gonna order mine today.
I have built a Basswood and Alder Tele and both are quite light but reckon Alder is the lightest. It can have an interesting reddish colour and grain but on mine there was too much variation with light and darker strips of timber used and it ended up looking like this.....
Have done a J Bass in Ash, and yes it is a much heavier wood with stunning grain that does tend to shrink back any grain filler which I left as a feature on mine. You can check it out in my signature.
Cheers, Waz
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
That might be the nicest looking Tele I've ever seen.
Wazkelly, that is definitely an awesome looking Tele, you did well.
I actually ordered the basswood yesterday so I値l see how she goes.
Thanks for your feedback.
Sent from my iPhone using Tapatalk
Basswood is a good place to start with. Just remember not to oversand if you are planning a stained finish as it polishes up way to easy. Suggest stop sanding after 180. I usually go nuts with 80 to knock down machine marks then as smooth as possible with 120 before deciding next step. Maybe light 180 and the apply 1st coat of stain.
Multiple top coats help to smooth things out plus all the wet sanding sessions akong the way.
Cheers, Waz
Sent from my SM-A520F using Tapatalk
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Thanks Waz, I知 going to paint it like a very light blue, almost vintage like.
Sent from my iPhone using Tapatalk
Then finish with this.
Sent from my iPhone using Tapatalk