Sounds like you have an earth issue to me. Where the earth wire attaches to the bridge could be the problem. hard to get enough heat to a big chunk of metal to make a good solder connection.
Love to see/hear the finished article
Sounds like you have an earth issue to me. Where the earth wire attaches to the bridge could be the problem. hard to get enough heat to a big chunk of metal to make a good solder connection.
Love to see/hear the finished article
Also make sure you haven’t got the wires on the output jack around the wrong way.
Photos of the (almost) finished product:
Mmm... Lemon Oily
Close up of some of the rough masking... Maybe I'll just say it was intentional relic-ing
I still need to put the string trees in and do the re-wiring, and after that there are a few components I want to upgrade - particularly the nut, the action at the first fret is diabolical! I've also started browsing reverb to see if any reasonably priced Jazzmaster pickups turn up, although the kit ones honestly aren't too bad.
Yeah man I agree the action on my JS1-A was brutal on the top 3 frets of course I wasnt smart enough to pull the nut out and sand the bottom... I cut deeper on the top... Same result tho plays a sh*^t load better. Nice buttery action now almost like a bought one and doesnt go sharp on the top 3 frets![]()