Hi there
Anyone know where i can find a colour like this?
Cheers
Tim
Hi there
Anyone know where i can find a colour like this?
Cheers
Tim
How are you planning on applying it? As in spray can or do you have access to spray equipment?
How I’ve done it in the past: Mix up your desired clear coat/binder and then add around 20% of white to it.
I find it looks nicer if you pop the grain first but that might not be the look you’re going for
Maybe Wudtone?
http://www.wudtone.com/australia/?wp...t-olympic-girl
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
If you were after Dingotone. They used to do a custom colour. not sure if they still do. Otherwise you could always order a Dingotone butterscotch. It comes with a white base coat, butterscotch colour and final coat. You make the butterscotch by mixing the white base coat and butterscotch colour. Technically you could just use the white base coat with no other stain.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Yeah, I think so.
http://www.wudtone.com/
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
They are definitely still around, but what the status of their latest Australian distributor is, who knows?
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck