Wiring for the ESR-1 Resonator kit

[adam]

Have a customer with an ESR-1 who needs help with the Piezo pickup.

I recall it was supposed to plug into on of the pots, but on some (or most) of the kits, there was no input on any of the pots.

Anyone recall the fix for the Piezo pickup on the ESR-1?

Thanks

[FrankenWashie]

You need to either get a pre amp, or there is a circuit that Corksniffer used that works well.
i think there’s a copy of the circuit diagram on his build thread.

[FrankenWashie]

This the one Adam;

Attachment 29935

[ravo]

This the one Adam;

Attachment 29935

G Day
I cannot open the attachment, is there another way to send.
You also mentioned a pre amp set up. where can i get one?
Cheers and thanks for your help. Glen Ravo

[FrankenWashie]

Let’s try this again...
Attachment 29946

[Simon Barden]

There's a problem with site-hosted photos at the moment. I've raised it in 'Feedback' and Darren is looking into it. Remotely hosted photos seem to display OK though.

[ravo]

Am i able to give you my email and send me attachment that way?? would that be ok???

[FrankenWashie]

Am i able to give you my email and send me attachment that way?? would that be ok???

Yeah mate, send me a PM, or take a look at Corksniffer's Build thread:

https://www.buildyourownguitar.com.a...orksniffer%27s

the diagram is shown in post #17 on page 2.

the circuit i am using is shown here post #61, page 7
https://www.buildyourownguitar.com.a...ght=Igor+blues

The key difference is Corksniffer's is finished and working, without pre-amp. Mine is still in the works, and the circuit is as yet untested.
(I get distracted....a LOT and often!), I have only just put sanding sealer on the body, and have yet to manufacture a new face plate for my frankenhacked Fishman pre amp.

[ravo]

Yeah mate, send me a PM, or take a look at Corksniffer's Build thread:

https://www.buildyourownguitar.com.a...orksniffer%27s

the diagram is shown in post #17 on page 2.

the circuit i am using is shown here post #61, page 7
https://www.buildyourownguitar.com.a...ght=Igor+blues

The key difference is Corksniffer's is finished and working, without pre-amp. Mine is still in the works, and the circuit is as yet untested.
(I get distracted....a LOT and often!), I have only just put sanding sealer on the body, and have yet to manufacture a new face plate for my frankenhacked Fishman pre amp.

Thanks
Does anyone know what the laminated timber upplied in kit is for????
The Resonator pick up wire has a plug does anyone know whit wire is what (red or Bl)

[icarus7681]

Hi,
I am about to start one of these that Adam dug out of the warehouse for me. Did anyone come up with a wiring diagram ? At a loss as to how to connect that piezo pickup.
Cheers,
Scott