Wiring a tune o matic style bridge

[Xmf16]

Hi, I just got my es-1 kit and I was reading through the wiring Diagram and it said I needed to wire a ground to the bridge and I’m not sure where to drill a hole for the wire
P.s. first build

[vh2580]

Hi in the bottom bridge post hole there is usually a small drill hole that goes into the cavity- will only be like 2mm diameter. If there isn't one that would be where you would drill so that when you push the bridge bush in with the bare wire in the post hole you will get your ground. Hope that makes sense

[Rossc0]

Following Thread has some pics of what you should see in the post hole etc.

http://www.buildyourownguitar.com.au...ead.php?t=8272