Looks great!!!
Looks great!!!
I wouldn't know. *Wink wink blush blush hahaOriginally Posted by emuflats
Finally had a moment to change the spit roaster rack over to this build from doing the Strat. Super pumped to now be able to get the whole body done at once rather than each side at a time. Still in the slow Tru oil zone. Up to 2000 grit now, so a few more coats, another level and then will start cutting the TO with gum turps to get them shiney shiney coats happening
It's probably also time to reveal this headstock situation. Was going to wait for the finale, but ah what the heck. Have got a good coverage on the neck and fretboard, just in the process of burying the decal. Then will give it some gloss coats as per the body when it's time. Lots of nice natural chatoyance in this headstock too. From the photos there looks to be a dent at the end of the lower part, but that is just the grain making an illusion.
Last edited by Bakersdozen; 20-04-2019 at 07:57 PM.
Whoah! very impressive chiselling...with a distinct sense of deja-vu.
Well done!
cheers, Mark.
Yup, thanks. Lots of sanding thereTook inspiration from Andyxlh on this one...
https://www.buildyourownguitar.com.a...d.php?p=174685
Last edited by Bakersdozen; 20-04-2019 at 08:21 PM.
Trying to show some of the grain on the neck. A little hard to capture in the given light I have at present...
DA-YUM! that’s some noice figure happening there!Trying to show some of the grain on the neck. A little hard to capture in the given light I have at present...
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Looking good! Love the headstock!
Sent from my iPhone using Tapatalk
Thanks mate
Posting Permissions
Reply With Quote
