Templates!
The string holes and screw holes are as per a standard Tele bridge, but then the pickup mounts are something altogether different.
When I first started plotting guitar builds 10 years ago, I always wanted an offset, angled humbucker in a Tele. Back in those days, I don't know that Rio Grande Twangbuckers existed yet, so I had planned to get a custom bridge plate machined, at great cost. Instead, I'm going to use left over aluminium plate and do it myself. I've got 4 strat sized skinny humbuckers I bought many years ago - specifically to test out in the abomination this neck once belonged to, before I discovered the whole fretboard was off. So they're going in, at an angle, to be wired in series for a whopping 19.6k ohm resistance. I'm going to squeeze a single 9.8k ohm in at the neck which should balance nicely.
I still need to cut some templates for the pickup routs, but I'm thinking I'll get the neck pocket done next.
Sent from my SM-G955F using Tapatalk