Hi guys I'm back....
I'd like thank Adam for doing a Baritone neck.
I've bought a 27" and I'm throwing it onto Tele body.
I was going to do a borax/enamel dip for the finish, but it to good a bit of timnber to hide behind paint!
Bruce
Hi guys I'm back....
I'd like thank Adam for doing a Baritone neck.
I've bought a 27" and I'm throwing it onto Tele body.
I was going to do a borax/enamel dip for the finish, but it to good a bit of timnber to hide behind paint!
Bruce
Bruce
Yep true story Bruce, it would be a shame to hide that one. What are you thinking, grain pop and a light stain or clear?
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
A light cedar stain, I'm thinking 70's style colouring.
Bruce
The supplied pick guard is not doing it for me.
I might just make a min one to hold the neck pickup and show more of the timber.
Bruce
You could always direct mount the Neck PUP, i always find something funny looking about those little pickup rings on a tele. That's completely personal view of course.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Yeh, I'll have to have a good think about it.
Bruce
I've just given the body a quick sand, wiped it with a damp cloth to pop up the grain, sanded it again and p it a grain sealer on.
It's starting to look pretty shmick!
Bruce
Not bad at all Alm_63, is that ash or alder?
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Andy it's an ash body, with a nice tight grain pattern
I'm just starting the clear now after a couple of coats of sicans base coat.
More pics later today.
Bruce
Here is a mock of the build
Bruce
Reply With Quote
