Nice one mate 👍🏻Originally Posted by Bakersdozen
M20 bolt epoxied to some flat wood. 14mm hole works great!
Nice one mate 👍🏻M20 bolt epoxied to some flat wood. 14mm hole works great!
Whipped up this little holder for all my gauged saws from stewmac. Onto the chisel holder tomorrow
Sent from my iPhone using Tapatalk
Finished sanding tonight. Ive wet the body so I'll give it another sand tomorrow. Hopefully my shellac should turn up on wendesday so I can spray the body ready for grain filler
Change of plans now also. This is going to be a Butterscotch finish now, not a paisley.
Sent from my iPhone using Tapatalk
Sprayed a couple of coats of shellac. Will let it sit for 24 hours before I sand and begin grain filling, which is definitely my most hated part of guitar building lol
Sent from my iPhone using Tapatalk
McLovin the work station mate. You'll be stacking up the builds soon
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thanks mate. I've built quite a few in thr past but this is my first in probably 3 years. I've Got 3 or 4 half built laying around lol
Sent from my iPhone using Tapatalk
Soooo back to a pasiley
I was going to bind it top and bottom but thinking I'll burst instead now
Not sure what's the best finish to go with but
Has anyone used ironlak or similar graffiti paint? They've got great colours available.
Sent from my iPhone using Tapatalk
I've had good results with it.
Also belton Molotow which has a better range of colours.
cheers, Mark.
Cheers, did you use their clear also? I'm thinking I'll clear over the vinyl, then spray the burst, then clear again
Sent from my iPhone using Tapatalk
Yes I used a couple of cans of their clear gloss.
cheers, Mark
Reply With Quote
