Looks great 👍🏻
Looks great 👍🏻
Great paisley choice
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Hey guys. I'd anyone able to help me out and tell me what size the tuner holes would be on my tele?
I'm not at home and I want to get some dowels to fill them. 10mm??
Sent from my iPhone using Tapatalk
Usually 9.5mm
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Thanks mate. Big helpOriginally Posted by Sonic Mountain
Sent from my iPhone using Tapatalk
Bloody 11.5. I bought 10mm dowel
Sent from my iPhone using Tapatalk
Ugh, sorry. All mine have been 9.5
EDIT: yeah, just checked not sure why yours is different.
Last edited by Sonic Mountain; 15-03-2019 at 12:57 PM.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
That sucks. If you can't get direct fit size, best to get slightly bigger than you need then sand down. You can use a hand drill or drill press and spin them against a sanding block until just right.
Yea that was the plan. All good. I'll grab some bigger ones tomorrow
Sent from my iPhone using Tapatalk
All good man. I meant to measure before I left for work but completely forgot.
Sent from my iPhone using Tapatalk
Reply With Quote
