Hi All,
Its been a few months since I've been on the forum, as i've been really busy and also waiting for good weather to start my first guitar build! I have the SV-1 and super excited to start especially as this is the first time building anything!
I finally got into the sanding and now up to looking a finishing but not sure where to go from here. I've read heaps on this forum and others, and each time I think i've got things under control i read something that just makes me question everything. So i though i'd put up a post and get your expert advice
What i've done so far:
1. Mock Build - All Good
2. Sanded the body and neck (240, 600 and 1200) - Came up really good, better than expected
But now i'm confused on what sealer, base coat, colour coat and clear finish products to use. What i do know is what i want it to look like, see pic below. This is how i want mine to look but not sure what products to use to get there.
Do i use something like the Dupli-Color range or something else, and what filler / sealer do i use prior to a base coat?
Any help would be really appreciated!