Page 5 of 5 FirstFirst ... 3 4 5
Results 41 to 42 of 42

Thread: TLA-1 First Build

  1. #41
    After reading this: https://www.thegearpage.net/board/in...screws.1867417, I've widened the second half of the screw holes on the neck pocket so that the thread does not bind when tightening the neck in place (the first half doesn't matter as it houses the non-threaded part of the screw). Definitely produced a superior "pull" of the neck against the pocket. I highly recommend doing that.

  2. #42
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,268
    Quote Originally Posted by mcamelo View Post
    After reading this: https://www.thegearpage.net/board/in...screws.1867417, I've widened the second half of the screw holes on the neck pocket so that the thread does not bind when tightening the neck in place (the first half doesn't matter as it houses the non-threaded part of the screw). Definitely produced a superior "pull" of the neck against the pocket. I highly recommend doing that.
    Makes sense.

    Sent from my SM-A520F using Tapatalk
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

Page 5 of 5 FirstFirst ... 3 4 5

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •