Enjoy.
Enjoy.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Tonerider Alnico II’s will be my neck pickup in my ES-3. I’ll give my thoughts when complete.
I've got these in my LP1-SS, they are awesome.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
My ES-1TL got built with these PU's.... So nice with a bit of overdrive ...
Builds-
#18 PBG GSH-1R https://www.buildyourownguitar.com.a...ad.php?t=10236
#17 PBG PBA-4 https://www.buildyourownguitar.com.a...ead.php?t=9984
#16 PBG IB-1Q http://www.buildyourownguitar.com.au...ead.php?t=8754
#15 PBG TLA-12 http://www.buildyourownguitar.com.au...ead.php?t=8444
#14 PBG PRS-1H
#11 Scratch build AC15 clone headhttps://www.buildyourownguitar.com.a...ead.php?t=7686
#09 PBG ES-1TL
#07 partscaster Alder Denim Tele.
These sound great. Is it just me or is the neck pick up in the video backwards?
Sent from my SM-J120ZN using Tapatalk
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
That was my understanding too. Wondering if it was done on purpose. Ha ha.
Sent from my SM-J120ZN using Tapatalk
No, you can physically flip them but the polarity remains the same. The only difference is that if tapped, the single coil that's active is in a different place. Also, if you raise the screw pole-pieces significantly and set the pickup lower to compensate (to give a mismatched output from the two coils which is supposed to sound more 'open' and seems quite popular at the moment), then flipping the pickup around will give a very slightly different sound as the stronger signal will be from a different part of the strings - but still no polarity change.
To reverse the polarity, you'd need to swap the ground and signal wire connections, so that red is connected to ground and green is the signal wire to the volume pot. Or you could take the pickup apart and flip the magnets over (rotated 180° around their long axis) and put them back again. That would also do the trick - which is what happened to the Peter Green Les Paul neck pickup. Yes, the pickup was also physically rotated (for most of its life anyway), but the 'Peter Green' sound was due to the magnet polarity swap on that pickup during a rewind.
The standard 'bridge pup screw poles nearest the bridge and neck pup screw poles nearest the neck' arrangement was picked on by Gibson purely for what they thought looked best on the guitar, and has generally been copied by everyone else ever since.
Last edited by Simon Barden; 25-11-2018 at 08:17 PM.
Thanks Simon. Very informative response.
Sent from my SM-J120ZN using Tapatalk