Headstock Gallery

**fender3x** · 10-11-2018, 02:27 AM

Over in the "Building Your Pitbull Guitar" part of the forum there are forums on Decals and on shaping headstocks. Finding myself at a loss for how to do my next headstock, I thought it would be good if there were a thread where folks could show off "headstock art" either that they had made or that they found to be an inspiration. Here's the one-and-only that I have made so far. Very simple. Did not cut the stock headstock. Waterslide decals were made with MS Word, an inkjet printer, and a bit of Krylon Workable Fixatif.

Click image for larger version.

Name: IMG_20170901_221505.jpg
Views: 576
Size: 137.9 KB
ID: 28997

**Andy40** · 10-11-2018, 06:57 AM

My tele headstock.

Sent from my Pixel using Tapatalk

**fender3x** · 10-11-2018, 08:07 AM

Very cool

Sent from my ONEPLUS A3000 using Tapatalk

**JohnH** · 10-11-2018, 05:05 PM

Great idea for a thread!

Both those headstocks are cool but that tele one really does it for me

**blinddrew** · 11-11-2018, 09:31 PM

Here's my only effort to date:

The blank was off centre and I wanted a simpler scroll at the top. I looked at my other guitars and none of them had a chamfer on the headstock so I added one.

The logo was a laser printer > packing tape > soak off in water job. Only thing I'd do differently there is apply it much sooner in the oiling process (say after the first half dozen coats).
Got a more complicated plan burgeoning for the next one.

**fender3x** · 12-11-2018, 01:29 AM

I like it. Also a beautiful truss rod but cover. Did you find it or make it?

Sent from my ONEPLUS A3000 using Tapatalk

**blinddrew** · 12-11-2018, 01:52 AM

Thanks, TRC was a homemade job. Bit of pine trimmed to size, was trying to be sympathetic to the waisted effect of the headstock, dyed with some watercolour paint, sanded, over-sanded, dyed again, repeat... Managed to mimic the horizontals in the scratch plate as well, but that was equal parts luck and judgement...