Thanks
Sent from my iPhone using Tapatalk
Oh dear, on applying the clear coat it looks like I have over cooked it in one area, this was the 3rd coat.
Would the recommendation be leave for 24-36 hours and sand that portion back and just re do that area or will I have to sand that whole side back?
Sent from my iPhone using Tapatalk
That should be ok. Just give it a good chance to dry and carefully sand with a flat block. Just be careful not to break through the clear and it'll be fine.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Nice one, very neat.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Hi Sonic
If you are still offering this service I could use a bit of help.
On my JMA-1 I have decided to do an onlay to mimic the switch plates on the body. Have worked out a shape but need to come up with a font for the lettering. Just want the word Barnes in a f3nder-y style font that can be printed instead of my sketched lettering.
Current (today's) thinking is to have the lettering done in vinyl.
Scan of the reversed headstock with low E string for reference and ruler for scale.
The three circles are approx placements of mounting screws.
Any thoughts/guidance will be greatfully appreciated, just could use a push in the right direction.
Cheers
Grant
Yep no probs. Is it a reverse headstock? That is, is the pic you've attached the right way up?
Edit: Lol.. read your post properly... yep its reversed.
Last edited by Sonic Mountain; 27-10-2019 at 01:49 PM.
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
Thanks Sonic, that was quick.
The first one with solid black lettering will work best, it'll be going on a chrome-like background. Thinking I might try to rotate the B clockwise so its back is the same angle as the side where the two screws will be.
Now I need to find a sign place to print up a few. Is this a common font they will recognise or should I give them that as well?
Thanks again, really appreciated.
Grant