Results 1 to 4 of 4

Thread: 1st proper build, would welcome advice

  1. #1
    Member
    Join Date
    Oct 2018
    Location
    Swansea, Wales (currently part of the UK)
    Posts
    2

    Question 1st proper build, would welcome advice

    Hi, Tim here from Swansea, Wales. I have just ordered a DM 1F (the double cut, single pick up model). It's actually my second build but the first was a V from Thomann that my son and I just literally screwed together and finished with door wax. However, reading just a few posts here has made me realise I need to do a bit more to get a guitar that looks good and plays nicely. I'd be grateful for advice about:

    FINISH if the wood looks nice and matches well I'll go for a natural finish. If it's not so well matched or gnarly I'll go for a stained finish. Dingotone is not available in the UK but Crimson Guitars do a good looking range of stains and a finishing oil (https://crimsonguitars.com/store/stunning-stains/). My question really is, how much prep in the way of sanding and/or filling am I likely to need to do?

    FRETS I see that a lot of builders level the frets and I don't think that would be beyond me. What specialist tools do I need? (I don't want to buy everything, just the bare necessities.)

    PICK UP I have ordered a hardware kit, so will get a P90 pick up (could be a Tone Rider?). However, my son has shown me the Warman Dominator, a quad humbucker that fits into a normal 'bucker rout (http://www.warmanguitars.co.uk/product/dominator/). On the one hand I fancy the simplicity of the P90 set up; on the other, a quad humbucker with coil splitting might be interesting. If I go the Dominator route I would have just a volume pot and a 3-way switch. Opinions welcome.

    Sorry about all the questions,

    Tim

  2. #2
    Member
    Join Date
    Oct 2018
    Location
    Swansea, Wales (currently part of the UK)
    Posts
    2

    Open the box!

    The kit arrived today, very quick delivery (once I had paid the VAT ...).

    Click image for larger version. 

Name:	Package copy.jpg 
Views:	29 
Size:	224.7 KB 
ID:	28829

    First thing to note the top veneer is really nicely matched, so that's one decision made for me. I'll be using a natural finish, no stains.

    Click image for larger version. 

Name:	Top copy.jpg 
Views:	35 
Size:	153.6 KB 
ID:	28830

    The neck fits into its pocket with a very slight intereference.

    Click image for larger version. 

Name:	Body neck.jpg 
Views:	37 
Size:	186.2 KB 
ID:	28831

    The frets are pretty well finished with just a couple of obvious snagging ends.

    All in all I am really pleased with the kit and impressed with its quality.

  3. #3
    Mentor JohnH's Avatar
    Join Date
    Apr 2017
    Location
    Canberra, Australia
    Posts
    953
    Nice looking kit. That veneer will come up a treat.

    To answer your question RE: fretting tools, I do mine with a notched straight edge to get the neck straight, a radius block to level, and a crowning file, plus some fine sandpaper and steel wool to finish. They weren't very expensive tools, and do a much better job that the tools I'd dodgied up to do the same job previously.

    Many people make their own notched straightedge, so you can do a bit of a search if you're into saving money and doing some DIY
    #001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
    #002 (WL-1)
    #003 (MPL Megacaster - semi scratch build) [finished]
    #004 (ST-1 JR - Arachnoid Superhero build) [finished]
    #005 (LP jr)

    Junk shop acoustic refurbs (various)
    'The TGS Special'

  4. #4
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,268
    Have to agree that is a nice looking veneered top plus neck also looks good too.
    # 1 - EX-5 https://goo.gl/fQJMqh
    # 2 - EX-1 https://goo.gl/KSY9W9
    # 3 - Non PBG Tele https://goo.gl/W14G5g
    # 4 - Non PBG J Bass https://goo.gl/FbBaFy
    # 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
    # 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
    # 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •